Concrete floor coating quotes in Pocatello, Idaho
(208) 555-0173
Concrete Floor Coatings

Concrete Floor Coatings in Pocatello, ID

A floor coating turns a plain garage or shop slab into a clean, durable, easy-to-wipe surface, but the system you choose and the prep underneath decide whether it lasts two years or twenty. Here is what epoxy, polyaspartic, and flake coatings cost in the Pocatello area, how they differ, and what to ask before you commit.

Finished concrete floor coating surface in Pocatello Idaho

What floor coatings cost in Pocatello

Professional floor coatings in the Pocatello area typically run about $5 to $12 per square foot depending on the system. A standard two-car garage of roughly 400 to 500 square feet often lands around $2,500 to $6,000. The cost drivers:

  • Coating system. Basic epoxy is the least expensive; polyaspartic and full flake systems cost more but last longer and resist UV and hot tires.
  • Current slab condition. Cracks, stains, pitting, and moisture all add prep work before coating.
  • Surface prep method. Diamond grinding or shot-blasting the slab for proper adhesion is labor that separates a lasting job from a peeling one.
  • Floor size and layout. Larger, open floors cost less per square foot than small or cut-up spaces.
  • Finish detail. Decorative flake blends, color, and a clear topcoat affect price.

Request a quote with your floor's approximate size and condition.

Prep matters more than appearance alone

A coated floor can look great on day one and still fail early if moisture, cracks, or weak prep are ignored. The single biggest reason coatings peel is being applied over a slab that was not properly ground or was still damp. Ask exactly how the surface will be cleaned, ground or shot-blasted, and how cracks and stains are treated before any coating goes down, whether the finish is epoxy, polyaspartic, or a decorative flake system.

Choosing the right system

  • Epoxy — proven and lower cost, but can yellow in sun and cures slowly.
  • Polyaspartic — fast-curing, UV-stable, resists hot-tire pickup; more durable.
  • Flake systems — decorative chips broadcast into the coating for a textured, hide-the-dirt finish, usually sealed with a polyaspartic topcoat.

Also ask how long before the floor can be used again, since polyaspartic often returns to service far faster than epoxy.

Floor coating FAQs

How much do concrete floor coatings cost in Pocatello?

Typically $5 to $12 per square foot depending on the system. A two-car garage (400 to 500 sq ft) often runs $2,500 to $6,000, with polyaspartic and flake systems costing more than basic epoxy.

Epoxy or polyaspartic?

Epoxy is proven and cheaper but can yellow and cures slowly. Polyaspartic cures fast, resists UV and hot tires, and lasts longer. Many floors use a flake system with a polyaspartic topcoat over an epoxy base.

Why does prep matter so much?

A coating is only as good as the prep beneath it. The slab must be ground or shot-blasted, cracks and stains treated, and moisture checked. Poor prep or a damp slab is the top reason coatings peel.

How long do coatings last?

A properly prepped polyaspartic or flake system can last 15 to 20 years or more in a garage. Basic epoxy lasts less, especially with hot tires and sunlight.

Visit the full FAQ page for more on coatings, slabs, and repair.

Related concrete services

You can also review concrete slab installation, concrete repair, stamped concrete, and the areas we serve page.